Arrma Typhon 4x4 3S BLX 1/8 Buggy : RTR
The TYPHON™ 4X4 3S BLX brings the power, strength, and style of the TYPHON 6S BLX buggy to a 3S-capable version
that reaches extreme 50+ mph speeds. Making your move into 1/8 scale brushless buggy bashing has never been easier - or more exciting!
ARRMA powers the TYPHON 4X4 3S BLX with its BLX100 brushless system, featuring a 3200Kv brushless motor and 100A ESC.
This 3S LiPo-capable setup has proven its speed and toughness in the GRANITE 4x4 BLX monster truck and SENTON 4x4 BLX short course truck.
As in those machines, the transmission and chassis have been beefed up to allow this buggy to take full advantage of the electronics' power.
The low centre of gravity, with wide arms and narrow buggy wheels and tyres, improves handling over all of your favorite bashing terrain
- race tracks, trails, muddy courses, skate parks, and more.
The body is the same size as that of the TYPHON 6S BLX model and captures the same sleek look, with body mounting points tweaked to
match the mounting points available on the chassis.
- Extremely durable
- Fast, 50+ mph speeds
- Ideal entry into brushless buggy bashing
- Tactic® TTX300 3-channel 2.4 GHz radio system with adjustable steering rate, end point, and trims
- ADS-7M waterproof, metal gear servo
- Max. Servo Torque @6V: 84 oz-in (6 kg-cm)
- Max. Servo Speed @6V: 0.14 s
- New wheel axles, 17mm wheel hubs and wheel nuts that accept standard 1/8 scale buggy wheels and tyres
- Waterpoof electronics
- BLX100 ESC with EC5 connector
- BLX 3200Kv brushless motor
- 2-year limited warranty
High-strength hook-and-loop straps are used to keep your batteries in place.
easy disassembly and is sprung-loaded to ensure it stays in position during use.
electronic speed controller (ESC) and receiver. The two-piece moulding comprises a lower box and upper lid that are sealed with high-quality rubber seals.
The ESC and steering servo are attached to this moulding, whilst the receiver sits inside the waterproof box.
allowing lightweight composite material to be used for reduced rotating mass without compromising strength.
The differential internals feature full-metal straight-cut gears, ensuring trouble-free operation.
The multi-spoke wheels feature standard 1/8th scale buggy dimensions with 17mm hex size.
the BLX100 ESC has over-voltage protection, and a two-stage LiPo cut-off for added cell management.
The fitted 12AWG high-quality wires and 6.0V BEC unit are combined with a three-mode throttle profile
(FWD/REVERSE/BRAKE) to provide the ultimate driving experience.
Recommended battery specification: 5000mAh - 35C minimum
aluminium motor can provides a premium look, whilst a four-pole internal configuration keeps the power supply smooth and consistent.
Gold bullet connectors allow fast and easy wire removal when you need to clean your vehicle.
for increased strength and long-lasting durability. The 40mm x 38mm x 20mm case size is industry standard, so the ADS-7M can also be
fitted in other RC vehicles. Operating at 6 kg-cm/6.5 kg-cm 6V/7.2V (83oz-inch/90oz-inch), this tough steering servo can reach full
articulation in 0.14 sec/0.12 sec 6V/7.2V.
by a wheel and trigger style radio transmitter. Ideal for new RC users and experienced bashing fans alike. Adjustable steering and throttle
trim will allow you to easily tune your control experience to suit your individual needs.
conditions, will be no problem. Rain, mud, snow, dirt and anything else you want to bash your way through.
bodyshell are all included, as standard. Please check the vehicle specifications for exact details of what is included in the box and what is required
to get your ARRMA vehicle running
Just add a 3S LiPo battery to your model and you are ready to blast past speeds of 50mph. No additional parts required!
- 6 to 8-Cell NiMH, 2S LiPo or 3S Hardcase LiPo Battery
- Appropriate LiPo/NiMH charger
- LiPo Charging Bag
- 4 AA Batteriesr
- (1) TYPHON 4X4 3S BLX 1/8 RTR Buggy
- (1) Tactic® TTX300 3-channel 2.4 GHz radio transmitter
- (1) Product Manual