Macgregor MG2611WHV 11kg/0.10s HV WING SERVO

Last items in stock
Tax included



  • High Performance, Digital High Voltage Wing Servo
  • High-Precision Metal Gears With Hard Anodising
  • Full CNC Aluminium Case, with Anodised Purple Centre Case
  • High Quality Coreless Motor
  • Dual Ball Bearings


The MG2611WHV is an ultra high speed and torque wing servo, part of MacGregor's range of high voltage digital servos designed for General use in RC Aeroplanes.

MacGregor's HV servos are designed with motors and electronics that operate off the direct voltage of a 2-cell Li-Po, Li-Ion, or Li-Fe receiver battery pack. This eliminates the need for a regulator and lowers the chance for a power failure that can cause a catastrophic failure of your model. Also note that the HV servo specs are shown at the higher voltage (8.4V 2S LiPo) but will still operate on a standard 5-cell 6V NiCd, Ni MH battery with a reduction in performance of approximately 10% in speed and torque.


Dead band: 2µs
Working frequency: 1520µs / 330hz
Motor: Coreless Motor
Gearset: Full Metal
Operating Voltage: 5.0 ~ 8.4V
Operating Speed (6.0V): 0.13sec/60°
Operating Speed (8.4V): 0.10sec/60°
Stall Torque (6.0V):
Stall Torque (8.4V):
Dimensions: 30 x 10 x 35.5mm
Weight: 26g (0.92oz)
Connector Wire Length: JR 185mm
Bearing: 2BB

MG2611WHV Servo Drawing