Predator 2M Composite Jet (Kit Only) (White/Orange/Black)

Out of stock
Tax included



  • Full Composite Construction
  • Aluminum tube for wings/stabiliser spar
  • Two pieces wing/stabiliser
  • External painted scheme
  • Removable wing/stabilizer/vertical fin
  • Servo extension wire included
  • CG checking plate include. Easy to check the CG yourself.
  • 3000ml fuel tank and fuel tube included. Option to add extra 3000ml fuel tank.
  • Preinstall tube for servo extension wire
  • Hardware included
  • Dual wall tail pipe(Diameter:105mm) for 8-30kg turbine included.
  • Normal flight turbine size: 8-16kg(80-160N) thrust, 3D flight turbine size: 18-26kg(180-260N) thrust
  • High quality Aluminium Air Trap(UAT for 8-22kg turbine) included.
  • Fuel dot and fuel tank vent with startup overflow fitting included
  • One servo for each flap , one servo for each aileron,one servos for rudder. one servo for each elevator, one servo for nose wheel. all use standard size servo.
  • Option to install vector thrust pipe for 3D flight.
  • Option for Navigation LED lights with programmer and Wiring
  • All the control horn preinstall and paint. No need the glue to finish predator jet.


Aileron: 17mm, Rudder: 25mm, Elevator: 13mm. Flap: 46mm for take off and 78mm for landing.

The CG is 283mm from the front leading edge on the root of the wing.


Wingspan:80.8 in(2.0M)
Wing Area: -
Fuselage length:90 in(2.28M)
Weight:10.8kg(23.76lbs) with jetsmunt M100 turbine
Engine:8-26kg thrust turbine

Schemes List



Pilot RC